Modules

7-Segment Display – LED (Red)

0,59 0,73 with vat

7-Segment Display – LED (Red)

Your basic 7-segment LED. Common anode. Two decimal points, but only the one on the right is wired. Digit height is 0.6″. Overall height is 1″ Documents: Datasheet Arduino Library

Learn More

0,59 0,73 with vat

  • Availability: in stock
708546
Analog/Digital Multiplexer/DeMultiplexer

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip can be used to connect 16 analog sources (like sensors) to 5 pins on a microcontroller. 4 of the pins must be digital pins, 1 pin must be an analog to digital conversion pin. This allows 16 sensors to operate […]

Learn More

4,88 6,05 with vat

  • Availability: in stock
709056
Big Easy Driver

20,12 24,95 with vat

Big Easy Driver

The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to 2A/phase. It is based on the Allegro A4988 stepper driver chip. It’s the next version of the popular Easy Driver board. Each Big Easy Driver can drive up to about 2A per phase of a […]

Learn More

20,12 24,95 with vat

  • Availability: in stock
712859
EasyDriver Stepper Motor Driver

10,49 13,01 with vat

EasyDriver Stepper Motor Driver

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. The […]

Learn More

10,49 13,01 with vat

  • Availability: in stock
709402
Electronic Brick – Touch Sensor/Button Brick

This is a simple touch sensor / button brick. You can use it to replace a traditional push button and add some cool element to your project

Learn More

2,89 3,58 with vat

  • Availability: in stock
719190
EV3 Sensor Multiplexer for EV3 or NXT

63,71 79,00 with vat

EV3 Sensor Multiplexer for EV3 or NXT

Do you need to connect several EV3 sensors to your robot at once? Not enough Sensor ports? No worries, EV3 sensor multiplexer is designed for that purpose. Connect upto 3 sensors on single sensor port Works with NXT or EV3. Connect any of the LEGO EV3 sensors. High speed polling architecture for high performance robots. […]

Learn More

63,71 79,00 with vat

  • Availability: in stock
701066
Nintendo DS touch screen (small)

7,90 9,80 with vat

Nintendo DS touch screen (small)

This is a 4-wire analog touch screen originally designed for the Nintendo DS. Add this touch screen to any LCD you want! Readings are taken by putting 5V across two of the pins and doing an analog to digital conversion on the other two pins. Full X and Y position can be achieved with only […]

Learn More

7,90 9,80 with vat

  • Availability: in stock
708997
RFID Reader (UART)

23,58 29,24 with vat

RFID Reader (UART)

HY502 series of RFID reader/writer modules are based on non-contact card reader ASCI chip compatible with ISO14443 standard. It uses 600nm CMOS EEPROM technology, supports ISO14443 typeA protocol, and also supports the MIFARE standard encryption algorithm. The chipset integrates analog modulation and demodulation circuits, only requires minimal peripheral circuits to function. The module supports UART […]

Learn More

23,58 29,24 with vat

  • Availability: in stock
700832
Grove Infrared Reflective Sensor

5,09 6,31 with vat

Grove Infrared Reflective Sensor ,

The reflectivity of infrared light varies with the color and distance of the reflecting surface. According to this principle, Grove – Infrared Reflective Sensor utilizes a RPR220 reflective photosensor module to detect color and distance. When a light-colored object approaches,the signal intensity received by infrared reflective sensor increases and the indicator LED on board turns […]

Learn More

5,09 6,31 with vat

  • Availability: in stock
727061
20 Channel GPS receiver

43,01 53,33 with vat

20 Channel GPS receiver

This GPS receiver comes with embedded antenna and only needs 5 pins to talk to your Arduino or MCU. Pin 1: GND Ground Pin 2: VCC Power supply of 3.3 ~ 3.5 VDC Pin 3: TX Port A serial data output (GPS out) N-8-1, NMEA v3.00 output Pin 4:RX Port A serial data input (GPS […]

Learn More

43,01 53,33 with vat

  • Availability: in stock
700835
Grove Button

1,95 2,42 with vat

Grove Button ,

This new version of button twig contains one independent button, configured with a pull-down resistor. Ready for use with a microcontrollers as digital input. The button signals the SIG wire, NC is not used on this twig.

Learn More

1,95 2,42 with vat

  • Availability: in stock
722242
DC Motor Driver 1A

7,24 8,98 with vat

DC Motor Driver 1A

The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes – CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, […]

Learn More

7,24 8,98 with vat

  • Availability: in stock
709457
LCD 16×2 characters, serial

13,74 17,04 with vat

LCD 16×2 characters, serial

The Serial LCD is extremely easily to interface with PCs, microcontrollers or any other device which can send the serial commands. The interface contains only 3 pins, 5V, GND and RX. It uses only 1 microcontroller pin, and so it saves lots of hardware complexities and time. To interface with PC sample code in Visual […]

Learn More

13,74 17,04 with vat

  • Availability: in stock
709394
13×2 Pin Female Header

1,55 1,92 with vat

13×2 Pin Female Header

These 0.1″ spaced female headers are perfect for building your own Raspberry Pi B add-on modules. These PTH headers are arranged in 2 rows of 13 and mate with the Raspberry Pi B GPIO header. For more information, check out the drawing below. Note: These mate with the Raspberry Pi B, but not the Raspberry Pi […]

Learn More

1,55 1,92 with vat

  • Availability: in stock
711765
2.4 TFT LCD TOUCH SCREEN MODULE: ITDB02-2.2.4D

ITDB02 is a TFT LCD Screen Module , 40pins interface , not just a LCD break but include the Touch , SD card and Flash design. So it’s a powerful extension module for your project.The LCD in the ITDB02 is 240374PQ . It’s a 65K color , 320*240 (resolution),2.4 inch TFT LCD screen.The LCD has […]

Learn More

20,98 26,02 with vat

  • Availability: in stock
701105
2A Dual Motor driver module with PWM control

L298 Motor driver based module. Small module which can be used with any circuit very easily. Controls 2 DC motors / 1 Stepper motor in both direction. PWM/NON PWM control using jumpers. Diodes provided for back EMF protection. Motor Driver Module Features Small board size – Just 45mm X 31mm L298 Based design Simple 8 […]

Learn More

8,10 10,04 with vat

  • Availability: in stock
700116
7-Segment Display – LED (Blue)

1,30 1,61 with vat

7-Segment Display – LED (Blue)

Your basic 7-segment LED, but in blue! Common anode. Two decimal points, but only the one on the right is wired. Digit height is 0.6″. Overall height is 1″. Check out this tutorial on how to use this product with the 74HC595 Shift Register and Arduino. Note: As far as we can tell the pinout […]

Learn More

1,30 1,61 with vat

  • Availability: in stock
708547
Adafruit Assembled Pi T-Cobbler Breakout for Raspberry

Now that you’ve finally got your hands on a Raspberry Pi® , you’re probably itching to make some fun embedded computer projects with it. What you need is an assembled add on prototyping Pi T-Cobbler from Adafruit, which can break out all those tasty power, GPIO, I2C and SPI pins from the 26 pin header […]

Learn More

6,99 8,67 with vat

  • Availability: in stock
701754
Bluetooth Mate Silver

26,82 33,26 with vat

Bluetooth Mate Silver

The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 9600 to 115200bps can be passed seamlessly from your […]

Learn More

26,82 33,26 with vat

  • Availability: in stock
710393
Out of stock
Bluetooth USB Micro Adapter 2.1

9,67 11,99 with vat

Bluetooth USB Micro Adapter 2.1 ,

The IOGEAR Bluetooth USB Micro Adapter offers Bluetooth connectivity at a fraction of the size of normal Bluetooth USB adapters. About the size of an adult fingernail, the IOGEAR Bluetooth USB Micro Adapter allows users to connect to all the latest Bluetooth devices like cell phones, PDAs, mice and keyboards. Because the Micro Adapter is so […]

Learn More

9,67 11,99 with vat

  • Availability: out of stock
707021
Dual Motor Driver (Electronic 5 Amp)

9,67 11,99 with vat

Dual Motor Driver (Electronic 5 Amp)

This is a ready to use dual H bridge module for controlling 2 DC motors with 5 Amp capacity each or a Stepper motor at max. 5 amp/phase. These motor drivers can be used to control any small to big motors. High speed PWM is also supported. It can be directly connected to 4 microcontroller […]

Learn More

9,67 11,99 with vat

  • Availability: in stock
700115
Dual Step Motor Driver Shield

18,99 23,55 with vat

Dual Step Motor Driver Shield

Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 30V. High accuracy controlling can be supported by Arduino for CNC milling machine.   It uses the same stepper motor driver chip as EasyDriver, so you can use it […]

Learn More

18,99 23,55 with vat

  • Availability: in stock
717015
Edimax WiFi Adapter

18,45 22,88 with vat

Edimax WiFi Adapter ,

The Edimax WiFi Adapter is a nano-sized USB wireless adapter that supports maximum range and speed when connected to your local network. Despite the size, this tiny USB adapter supports a data rate of up to 150Mbps when connected with a wireless 802.11n device. Simply plug it into any USB port and enjoy incredible high-speed […]

Learn More

18,45 22,88 with vat

  • Availability: in stock
713677
Embedded Serial Web Server Module

10,00 12,40 with vat

Embedded Serial Web Server Module

LinkSprite embedded serial web server module is designed to provide a TCP/IP access to the serial data. The output pin uses a 20-pin 2mm spacing layout, which is pin-compatible with Xbee module from Digi (http://www.digi.com/). The LinkSprite embedded serial web server module can also be plugged directly on LinkSprite PLC-UART power line communication module to […]

Learn More

10,00 12,40 with vat

  • Availability: in stock
700834
Fingerprint Scanner – 5V TTL (GT-511C1R)

35,70 44,27 with vat

Fingerprint Scanner – 5V TTL (GT-511C1R)

Fingerprint scanners are awesome. Why use a key when you have one right at the tip of your finger? Unfortunately, they&apos re usually unreliable or difficult to implement. Well not anymore! We’ve found this great fingerprint module from ADH-Tech that communicates over TTL Serial so you can easily embed it into your next project. The […]

Learn More

35,70 44,27 with vat

  • Availability: in stock
711836
Full BreadBoard PCB Module

6,00 7,44 with vat

Full BreadBoard PCB Module ,

With this BreadBoard-shaped PCB you can keep your project and move straight ahead to the next one: 62 lines 5V / GND rows splittable in two!

Learn More

6,00 7,44 with vat

  • Availability: in stock
710080
H-Bridge Motor Driver 1A

2,68 3,32 with vat

H-Bridge Motor Driver 1A

Faster, cheaper, smaller, better, right? The SN754410 Quad Half H-Bridge is just that. Capable of driving high voltage motors using TTL 5V logic levels, the SN754410 can drive 4.5V up to 36V at 1A continuous output current! Please see datasheet for more information. This is a pin to pin compatible replacement for the L293D.

Learn More

2,68 3,32 with vat

  • Availability: in stock
710315
Joystick Breakout Module

4,90 6,08 with vat

Joystick Breakout Module

The joystick on this module is very similar to the ‘analog’ joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers – one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is pressed down. There are 5 pins on board: VCC, […]

Learn More

4,90 6,08 with vat

  • Availability: in stock
712009
Joystick Shield kit

12,76 15,82 with vat

Joystick Shield kit

The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4 joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo […]

Learn More

12,76 15,82 with vat

  • Availability: in stock
709490
L293D Motor driver IC

1,99 2,47 with vat

L293D Motor driver IC

293D Dual Full Bridge Driver, for 2 DC motors or a Stepper motor in bipolar mode. Features Wide Supply-Voltage Range: 4.5 V to 36 V Separate Input-Logic Supply Pin compatible with L293D Internal ESD Protection Thermal Shutdown High-Noise-Immunity Inputs Output Current 0.6 A Per Channel Peak Output Current 2 A Per Channel Output Clamp Diodes […]

Learn More

1,99 2,47 with vat

  • Availability: in stock
711068
LED Matrix RGB

22,76 28,22 with vat

LED Matrix RGB ,

Triple Color LED Matrix! This large matrix has 64 Red, 64 Green, and 64 Blue individual LEDs built into one common cathode housing. It&apos s a monster to control, but just imagine what kind of colors you could produce by mixing! Unit comes with a black finish and opaque LED lenses.   Documents: Triple Color […]

Learn More

22,76 28,22 with vat

  • Availability: in stock
700683
LED Matrix serial RGB

47,97 59,48 with vat

LED Matrix serial RGB ,

This is a large sized RGB LED Matrix with a backpack that has been designed to take SPI serial input and display any graphics you pass it. All the refreshing and communication control is taken care of by the backpack. It&apos s even reprogrammable! 7 software selectable colors are available! Unit comes with a Red/Green/Blue […]

Learn More

47,97 59,48 with vat

  • Availability: in stock
700760
Magnetometer Digital Triple Axis

4,86 6,03 with vat

Magnetometer Digital Triple Axis

This is Honeywell’s HMC5883L, a 3-axis digital magnetometer designed for low-field magnetic sensing. The sensor has a full-scale range of ±8 Guass and a resolution of up to 5 milli-Gauss. Supplied voltage should be between 2.16 and 3.6VDC. Communication with the HMC5883L is simple and all done through an I2C interface. All registers and operating […]

Learn More

4,86 6,03 with vat

  • Availability: in stock
710494
Matrix Membrane Keypad

2,85 3,53 with vat

Matrix Membrane Keypad

This is a small new four by three matrix twelve key membrane switch keypad that is easy to use and will look nice in your project. It is very useful if you need it for prototyping with a breadboard or just need a keypad for your project.It can be glued to a surface and still […]

Learn More

2,85 3,53 with vat

  • Availability: in stock
701117
MC33932 5A Dual H-Bridge

8,40 10,42 with vat

MC33932 5A Dual H-Bridge

The MC33932 is a monolithic power IC comprising control logic, charge pump, gate drive, and low RDS(ON) MOSFET output H-Bridge circuitry into a small surface mount package. It is designed to drive inductive loads with RMS currents up to 5.2 A in both directions. In addition, the current drive can be pulse width modulated (PWM) […]

Learn More

8,40 10,42 with vat

  • Availability: in stock
710067
Nokia 5110 LCD screen

8,50 10,54 with vat

Nokia 5110 LCD screen

The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended for as a cell phone screen. This one is mounted on an easy to solder PCB. It uses the PCD8544 controller, which is the same used in the Nokia 3310 LCD. The PCD8544 is a low power CMOS […]

Learn More

8,50 10,54 with vat

  • Availability: in stock
701102

Showing 1–36 of 49 results

Register