Modules

7-Segment Display – LED (Red)

0,59 exclude vat

7-Segment Display – LED (Red)

Your basic 7-segment LED. Common anode. Two decimal points, but only the one on the right is wired. Digit height is 0.6″. Overall height is 1″ Documents: Datasheet Arduino Library

Learn More

0,59 exclude vat

  • Availability: in stock
708546
Analog/Digital Multiplexer/DeMultiplexer

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip can be used to connect 16 analog sources (like sensors) to 5 pins on a microcontroller. 4 of the pins must be digital pins, 1 pin must be an analog to digital conversion pin. This allows 16 sensors to operate […]

Learn More

4,88 exclude vat

  • Availability: in stock
709056
Big Easy Driver

20,12 exclude vat

Big Easy Driver

The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to 2A/phase. It is based on the Allegro A4988 stepper driver chip. It’s the next version of the popular Easy Driver board. Each Big Easy Driver can drive up to about 2A per phase of a […]

Learn More

20,12 exclude vat

  • Availability: in stock
712859
EasyDriver Stepper Motor Driver

10,49 exclude vat

EasyDriver Stepper Motor Driver

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. The […]

Learn More

10,49 exclude vat

  • Availability: in stock
709402
Electronic Brick – Touch Sensor/Button Brick

This is a simple touch sensor / button brick. You can use it to replace a traditional push button and add some cool element to your project

Learn More

2,89 exclude vat

  • Availability: in stock
719190
HiTechnic MiniScope

60,00 exclude vat

HiTechnic MiniScope ,

perfect companion to the HiTechnic SuperPro Experimenters Kit (702017)USB cable – allows the MiniScope board to be connected to a Windows PCDVD – MiniScope Application with Application Guide lets you view analog & digital signa HiTechnic MiniScope The HiTechnic MiniScope – a full featured dual channel digital oscilloscope with an auxiliary 4 channel digital input […]

Learn More

60,00 exclude vat

  • Availability: in stock
792040
Nintendo DS touch screen (small)

This is a 4-wire analog touch screen originally designed for the Nintendo DS. Add this touch screen to any LCD you want! Readings are taken by putting 5V across two of the pins and doing an analog to digital conversion on the other two pins. Full X and Y position can be achieved with only […]

Learn More

7,90 exclude vat

  • Availability: in stock
708997
RFID Reader (UART)

23,58 exclude vat

RFID Reader (UART)

HY502 series of RFID reader/writer modules are based on non-contact card reader ASCI chip compatible with ISO14443 standard. It uses 600nm CMOS EEPROM technology, supports ISO14443 typeA protocol, and also supports the MIFARE standard encryption algorithm. The chipset integrates analog modulation and demodulation circuits, only requires minimal peripheral circuits to function. The module supports UART […]

Learn More

23,58 exclude vat

  • Availability: in stock
700832
Grove Infrared Reflective Sensor

The reflectivity of infrared light varies with the color and distance of the reflecting surface. According to this principle, Grove – Infrared Reflective Sensor utilizes a RPR220 reflective photosensor module to detect color and distance. When a light-colored object approaches,the signal intensity received by infrared reflective sensor increases and the indicator LED on board turns […]

Learn More

5,09 exclude vat

  • Availability: in stock
727061
20 Channel GPS receiver

43,01 exclude vat

20 Channel GPS receiver

This GPS receiver comes with embedded antenna and only needs 5 pins to talk to your Arduino or MCU. Pin 1: GND Ground Pin 2: VCC Power supply of 3.3 ~ 3.5 VDC Pin 3: TX Port A serial data output (GPS out) N-8-1, NMEA v3.00 output Pin 4:RX Port A serial data input (GPS […]

Learn More

43,01 exclude vat

  • Availability: in stock
700835
Grove Button

1,95 exclude vat

Grove Button

This new version of button twig contains one independent button, configured with a pull-down resistor. Ready for use with a microcontrollers as digital input. The button signals the SIG wire, NC is not used on this twig.

Learn More

1,95 exclude vat

  • Availability: in stock
722242
DC Motor Driver 1A

7,24 exclude vat

DC Motor Driver 1A

The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes – CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, […]

Learn More

7,24 exclude vat

  • Availability: in stock
709457

Showing 1–12 of 48 results

Register