Electronic Modules

(Ελληνικά)

Η κατηγορία Ηλεκτρονικές Μονάδες περιέχει υλικά συμβατά με όλες τις ανοιχτές πλατφόρμες ανάπτυξης.

Οδηγοί Κινητήρων Οθόνες
Ενσύρματη Επικοινωνία Ασύρματη Επικοινωνία
Πληκτρολόγια Χειριστήρια

7-Segment Display – LED Red

0,59 0,73 with vat

7-Segment Display – LED Red

7-Segment Display – LED Red Your basic 7-segment LED. Common anode. Two decimal points, but only the one on the right is wired. Digit height is 0.6″. Overall height is 1″ Documents: Datasheet Arduino Library

Learn More

0,59 0,73 with vat

  • Availability: in stock
708546
7-Segment Display – LED (Blue)

1,30 1,61 with vat

7-Segment Display – LED (Blue)

Your basic 7-segment LED, but in blue! Common anode. Two decimal points, but only the one on the right is wired. Digit height is 0.6″. Overall height is 1″. Check out this tutorial on how to use this product with the 74HC595 Shift Register and Arduino. Note: As far as we can tell the pinout […]

Learn More

1,30 1,61 with vat

  • Availability: in stock
708547
Analog/Digital Multiplexer/DeMultiplexer

Analog/Digital Multiplexer/DeMultiplexer This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip can be used to connect 16 analog sources (like sensors) to 5 pins on a microcontroller. 4 of the pins must be digital pins, 1 pin must be an analog to digital conversion pin. This allows 16 sensors […]

Learn More

4,88 6,05 with vat

  • Availability: in stock
709056
Big Easy Driver

20,12 24,95 with vat

Big Easy Driver

The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to 2A/phase. It is based on the Allegro A4988 stepper driver chip. It’s the next version of the popular Easy Driver board. Each Big Easy Driver can drive up to about 2A per phase of a […]

Learn More

20,12 24,95 with vat

  • Availability: in stock
712859
Dual Motor Driver (Electronic 5 Amp)

9,67 11,99 with vat

Dual Motor Driver (Electronic 5 Amp)

This is a ready to use dual H bridge module for controlling 2 DC motors with 5 Amp capacity each or a Stepper motor at max. 5 amp/phase. These motor drivers can be used to control any small to big motors. High speed PWM is also supported. It can be directly connected to 4 microcontroller […]

Learn More

9,67 11,99 with vat

  • Availability: in stock
700115
EasyDriver Stepper Motor Driver

10,49 13,01 with vat

EasyDriver Stepper Motor Driver

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. The […]

Learn More

10,49 13,01 with vat

  • Availability: in stock
709402
Nintendo DS touch screen (small)

7,90 9,80 with vat

Nintendo DS touch screen (small)

This is a 4-wire analog touch screen originally designed for the Nintendo DS. Add this touch screen to any LCD you want! Readings are taken by putting 5V across two of the pins and doing an analog to digital conversion on the other two pins. Full X and Y position can be achieved with only […]

Learn More

7,90 9,80 with vat

  • Availability: in stock
708997
USB to TTL & Xbee xplorer

6,50 8,06 with vat

USB to TTL & Xbee xplorer

Foca is a FT232RL breakout. The FT232RL is a USB to serial UART interface with optional clock generator output. It’s the essential tools for establishing communication between PC and mostly MCU. Especially, it’s the optimum tool for the board which basic Arduino but without USB interface,like pro mini , Colorduino and etc. Features: Single chip […]

Learn More

6,50 8,06 with vat

  • Availability: in stock
701103
XBee 2mW Antenna – Series 2 (ZigBee Mesh) ,

This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! […]

Learn More

21,00 26,04 with vat

  • Availability: in stock
708665
XBee Pro 63mW PCB Antenna – Series 2B (ZigBee Mesh) ,

This is the XBee XBP24-BZ7PIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, […]

Learn More

40,00 49,60 with vat

  • Availability: in stock
710418
XBee Pro 63mW Wire Antenna – Series 2B (ZigBee Mesh) ,

This is the XBee XBP24-BZ7WIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, […]

Learn More

49,10 60,88 with vat

  • Availability: in stock
710421
Voice Recognition Module

56,83 70,47 with vat

56,83 70,47 with vat

  • Availability: in stock
709753
Fingerprint Scanner – 5V TTL (GT-511C1R)

35,70 44,27 with vat

Fingerprint Scanner – 5V TTL (GT-511C1R) , ,

(Ελληνικά) Αισθητήρας δακτυλικού αποτυπώματος GT-511C1R

Learn More

35,70 44,27 with vat

  • Availability: in stock
711836
RFID R/W Module UART

23,58 29,24 with vat

23,58 29,24 with vat

  • Availability: in stock
700832
DC Motor Driver 1A

7,24 8,98 with vat

DC Motor Driver 1A

The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes – CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, […]

Learn More

7,24 8,98 with vat

  • Availability: in stock
709457
LCD 16×2 characters, serial

13,74 17,04 with vat

LCD 16×2 characters, serial

The Serial LCD is extremely easily to interface with PCs, microcontrollers or any other device which can send the serial commands. The interface contains only 3 pins, 5V, GND and RX. It uses only 1 microcontroller pin, and so it saves lots of hardware complexities and time. To interface with PC sample code in Visual […]

Learn More

13,74 17,04 with vat

  • Availability: in stock
709394
Scratch Controller

32,52 40,32 with vat

Scratch Controller ,

Scratch Controller is an input device designed for use with the popular Scratch programming language.

Learn More

32,52 40,32 with vat

  • Availability: in stock
711530
2.4 TFT LCD TOUCH SCREEN MODULE: ITDB02-2.2.4D ,

ITDB02 is a TFT LCD Screen Module , 40pins interface , not just a LCD break but include the Touch , SD card and Flash design. So it’s a powerful extension module for your project.The LCD in the ITDB02 is 240374PQ . It’s a 65K color , 320*240 (resolution),2.4 inch TFT LCD screen.The LCD has […]

Learn More

20,98 26,02 with vat

  • Availability: in stock
701105
2A Dual Motor driver module with PWM control

L298 Motor driver based module. Small module which can be used with any circuit very easily. Controls 2 DC motors / 1 Stepper motor in both direction. PWM/NON PWM control using jumpers. Diodes provided for back EMF protection. Motor Driver Module Features Small board size – Just 45mm X 31mm L298 Based design Simple 8 […]

Learn More

8,10 10,04 with vat

  • Availability: in stock
700116
Bluetooth Mate Silver

26,82 33,26 with vat

Bluetooth Mate Silver

The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 9600 to 115200bps can be passed seamlessly from your […]

Learn More

26,82 33,26 with vat

  • Availability: in stock
710393
Breakout Board for FT232RL USB to Serial

10,00 12,40 with vat

Breakout Board for FT232RL USB to Serial

Basic breakout board for FTDI’s popular USB to UART IC. Now with internal oscillator and EEPROM, the FT232RL is an impressive IC! VCCIO is now tied to 3.3V through a solder jumper. You have the option of clearing this jumper and tying the VCCIO pin to 5V or any other IO voltage you need. For […]

Learn More

10,00 12,40 with vat

  • Availability: in stock
710718
Edimax WiFi Adapter

18,45 22,88 with vat

Edimax WiFi Adapter ,

The Edimax WiFi Adapter is a nano-sized USB wireless adapter that supports maximum range and speed when connected to your local network. Despite the size, this tiny USB adapter supports a data rate of up to 150Mbps when connected with a wireless 802.11n device. Simply plug it into any USB port and enjoy incredible high-speed […]

Learn More

18,45 22,88 with vat

  • Availability: in stock
713677
Embedded Serial Web Server Module

10,00 12,40 with vat

Embedded Serial Web Server Module

LinkSprite embedded serial web server module is designed to provide a TCP/IP access to the serial data. The output pin uses a 20-pin 2mm spacing layout, which is pin-compatible with Xbee module from Digi (http://www.digi.com/). The LinkSprite embedded serial web server module can also be plugged directly on LinkSprite PLC-UART power line communication module to […]

Learn More

10,00 12,40 with vat

  • Availability: in stock
700834
FTDI Basic Breakout – 3.3V

16,77 20,79 with vat

FTDI Basic Breakout – 3.3V

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to […]

Learn More

16,77 20,79 with vat

  • Availability: in stock
719873
FTDI Basic Breakout – 5V

15,09 18,71 with vat

FTDI Basic Breakout – 5V

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to […]

Learn More

15,09 18,71 with vat

  • Availability: in stock
719716
H-Bridge Motor Driver 1A

2,68 3,32 with vat

H-Bridge Motor Driver 1A ,

Faster, cheaper, smaller, better, right? The SN754410 Quad Half H-Bridge is just that. Capable of driving high voltage motors using TTL 5V logic levels, the SN754410 can drive 4.5V up to 36V at 1A continuous output current! Please see datasheet for more information. This is a pin to pin compatible replacement for the L293D.

Learn More

2,68 3,32 with vat

  • Availability: in stock
710315
IR remote control

3,17 3,93 with vat

IR remote control ,

IR remote control Have you ever needed a cheap way to activate something from across the room? Infrared remotes are still the cheapest way to wirelessly control a device. We chose this remote because it’s small, very simple, and low-cost. For the majority of the projects we build, we don’t need 34 buttons, we need […]

Learn More

3,17 3,93 with vat

  • Availability: in stock
710280
Joystick Breakout Module

4,90 6,08 with vat

Joystick Breakout Module

The joystick on this module is very similar to the ‘analog’ joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers – one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is pressed down. There are 5 pins on board: VCC, […]

Learn More

4,90 6,08 with vat

  • Availability: in stock
712009
L293D Motor driver IC

1,99 2,47 with vat

L293D Motor driver IC

293D Dual Full Bridge Driver, for 2 DC motors or a Stepper motor in bipolar mode. Features Wide Supply-Voltage Range: 4.5 V to 36 V Separate Input-Logic Supply Pin compatible with L293D Internal ESD Protection Thermal Shutdown High-Noise-Immunity Inputs Output Current 0.6 A Per Channel Peak Output Current 2 A Per Channel Output Clamp Diodes […]

Learn More

1,99 2,47 with vat

  • Availability: in stock
711068
LCD Display Module

5,49 6,81 with vat

LCD Display Module

A 16×2 Character LCD Display Module with Blue Blacklight wide viewing angle and high contrast.

Learn More

5,49 6,81 with vat

  • Availability: in stock
713759
LED Matrix RGB

22,76 28,22 with vat

LED Matrix RGB

Triple Color LED Matrix! This large matrix has 64 Red, 64 Green, and 64 Blue individual LEDs built into one common cathode housing. It&apos s a monster to control, but just imagine what kind of colors you could produce by mixing! Unit comes with a black finish and opaque LED lenses.   Documents: Triple Color […]

Learn More

22,76 28,22 with vat

  • Availability: in stock
700683
LED Matrix serial RGB

47,97 59,48 with vat

LED Matrix serial RGB

This is a large sized RGB LED Matrix with a backpack that has been designed to take SPI serial input and display any graphics you pass it. All the refreshing and communication control is taken care of by the backpack. It&apos s even reprogrammable! 7 software selectable colors are available! Unit comes with a Red/Green/Blue […]

Learn More

47,97 59,48 with vat

  • Availability: in stock
700760
Matrix Membrane Keypad

2,85 3,53 with vat

Matrix Membrane Keypad

This is a small new four by three matrix twelve key membrane switch keypad that is easy to use and will look nice in your project. It is very useful if you need it for prototyping with a breadboard or just need a keypad for your project.It can be glued to a surface and still […]

Learn More

2,85 3,53 with vat

  • Availability: in stock
701117
MC33932 5A Dual H-Bridge

8,40 10,42 with vat

MC33932 5A Dual H-Bridge ,

The MC33932 is a monolithic power IC comprising control logic, charge pump, gate drive, and low RDS(ON) MOSFET output H-Bridge circuitry into a small surface mount package. It is designed to drive inductive loads with RMS currents up to 5.2 A in both directions. In addition, the current drive can be pulse width modulated (PWM) […]

Learn More

8,40 10,42 with vat

  • Availability: in stock
710067
Mindstorms Breadboard Connector Kit

4,36 5,41 with vat

Mindstorms Breadboard Connector Kit ,

The Mindstorms Breadboard Connector Kit extends the capabilities of LEGO Mindstorms through open hardware!

Learn More

4,36 5,41 with vat

  • Availability: in stock
701060
Nokia 5110 LCD screen

8,50 10,54 with vat

Nokia 5110 LCD screen ,

The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended for as a cell phone screen. This one is mounted on an easy to solder PCB. It uses the PCD8544 controller, which is the same used in the Nokia 3310 LCD. The PCD8544 is a low power CMOS […]

Learn More

8,50 10,54 with vat

  • Availability: in stock
701102

Showing 1–36 of 47 results

Register